Enamel - painting materials, like paint. The difference between them is that the enamel is a suspension of pigments and fillers in a solution of artificial or synthetic resin. A coating formed from enamel and glitters usually much harder than in the paint.
Enamel - varieties:
Enamel PF or Nitrocellulose (PF-115, PF-133, PF - 266, etc.), that is available on Nitrocellulose lacquer.
GF enamel or Gliphtal (GF - 92 GF - 230 GF - 92 XC and so. D.), That is available glyptal varnish.
Enamel or silicone KO (KO - 42, KO - 814, and so on. D.), Differ from other enamels good thermal stability.
Enamels NTs are made based on nitrocellulose (NC-25, SC-273, SC-5123, etc.), are resistant to static film to water and industrial oils.
Enamels made on the basis of intrinsic viscosity of the chlorinated polyvinyl chloride resin and an alkyd resin (HV-124, HV-714, HV-785 and the like. D.), And exhibit good weatherability himikostoykostyu.
Enamel AK made of acrylic resin (AK-522), have a high light fastness (save whites under UV irradiation).
Enamel AU made on the basis of alkyd-acrylic lacquer (AS-182). Have good barrier properties and stores them in tropical and temperate climates.
Enamel EP made on the basis of alkidnoepoksidnoy resin. Most enamels of this brand is classified as B2 - ie all areas of operation, except for the Far North.
Enamels are made on the basis of the PL fenolomaslyanom lacquer (FL - 254 FL - 235 and so on. D.). Have higher quality indicators for speed drying tverdosi, luster, durability.